The PS5 was designed around a very fast internal SSD. Games are built to pull textures and map data off the drive while you play, rather than loading everything up front. That one design choice explains most of the rules above.
Why a USB drive can’t run PS5 games
A PS5 game expects its data to arrive at internal-SSD speed, several gigabytes a second. USB 3 tops out far below that, and a hard drive is slower still, so Sony blocks PS5 games from running off USB rather than let them stutter. An M.2 drive in the expansion slot sits on the same PCIe Gen4 lanes as the internal drive, which is why it can run them.
Why your 1TB drive shows less than 1TB
Drive makers count a terabyte as 1,000 billion bytes; consoles count in binary units, which makes the same drive read about 7% smaller. On the internal drive, Sony also reserves space for the system software. That is how an “825 GB” PS5 ends up with about 667 GB for games, and why a 1TB M.2 drive gives you room for about four games of 212 GB, not five.
Why the heatsink matters
NVMe drives get hot under sustained load, and a hot drive slows itself down to protect its chips, which shows up as longer loads and texture pop-in. The PS5’s slot sits in the console’s airflow, but Sony still wants a heatsink or heat-transfer sheet on the drive. A heatsink that comes fitted is the easiest way to meet that; the slot cover goes back on top.
Reading the speed numbers
Listings quote sequential read speed in MB/s. It is the number Sony uses for its 5,500 MB/s recommendation, and anything between about 6,000 and 7,500 MB/s performs much the same in a PS5. Endurance (TBW) and warranty length matter more for a drive you will keep for years: every M.2 pick here carries five years.